Dolby Atmos LG OLED TV Denon AV receiver for Netflix Amazon prime Video Connections

 

Dolby Atmos LG OLED TV Denon AV receiver for Netflix Amazon prime Video Connections

July 20, 2020

Some of the Netflix Dolby Vision Movies or shows support Dolby Atmos format. Please do the settings to make it work.

Update the firmware of LG TV and Denon AV receiver.
Denon AV receiver Supports Dolby Atmos

Video, select HDMI control ON
Connect HDMI OUT port of AV receiver to HDMI IN of LG OLED TV
Use good quality HDMI cable.
LG TV side

select Audio OUT as ARC/OPTICAL OUT
also, connect the optical cable from TV audio out to AV receiver IN port.
The optical solution provides better sound quality.
Once all the settings are made, turn off both Denon receiver and LG OLED TV.
Power on both TV and receiver.
Start Netflix APP and Dolby Atmos movie.
Your Denon receiver will show the sound format as DOLBY ATMOS.
You will feel different feelings when you watch Dolby Atmos formatted movies.

When you run movies supports Dolby Atmos in AMAZON Prime Video, the receiver will show the Dolby Atmos on the screen. The best show in Amazon Prime Video to test is 

Tom Clancy's Jack Ryan

Netgear Multi-gig Internet port Aggregation set up

 

Netgear Multi-gig Internet port Aggregation set up

Netgear Multi-gig Internet port Aggregation set up

Ethernet port aggregation between two devices Router and modem allows your devices to treat multiple Ethernet links as if they were a single link. Combining two network connections increases bandwidth and provides network redundancy if one link fails.

To set up Ethernet port aggregation on your NETGEAR Nighthawk CM1100 Multi-Gig Speed Cable Modem:

1.     Launch a web browser from a device that is connected to your cable modem.

2.     Enter 192.168.100.1

A login window opens.

3.     Enter the user name and password.

The BASIC Home page displays.

The user name is admin. The default password is password. The user name and password are case-sensitive.

4.     Select ADVANCED > Advanced Setup > Ethernet Port Aggregation.The Ethernet Port Aggregation page displays.

5.     Select Enable (LACP-IEEE 802.3ad).

6.     Click Apply.

7.     Set up Ethernet port aggregation on the other network device. Better to use Netgear router on other end and enable port aggregation of Uplink and port #1

8.     Using two Ethernet cables, connect LAN1 and LAN2 to the aggregated ports on the other network device.

After you connect the linked WAN ports on the device that supports Ethernet Port Aggregation to the two linked ports on the cable modem, the Ethernet Port Aggregation Status will show as Active if your router has enabled WAN Aggregation.

Log in to your router and enable Internet port aggregation: a. Launch a web browser from a computer or mobile device that is connected to the router network A login window opens.Enter the router admin user name and password.. The BASIC Home page displays.

d. Select Internet. The Internet Setup page displays. e. In the WAN Preference section, select the WAN aggregation (1 Gbps + 1 Gbps) radio button.

 f. Click the Apply button. Your settings are saved.

3. Connect the Internet port and Ethernet port 1on your router to two Ethernet ports on your modem.