Liquid Detected charging not available because liquid has been detected in the lightning connector - IPHONE IOS 15.5

 

If you are getting this message, especially in you are on vacation, please do the following 

1. Change the USB lightning connector

2. If the problem persists, reboot the phone. While it is rebooting, when you see the apple sign

connect the USB cable. Do not do anything until it charges to 100%

3. Once it is fully charged, unplug the USB cable, and open any APPS you like.

Dolby Atmos LG OLED TV Denon AV receiver for Netflix Amazon prime Video Connections

 

Dolby Atmos LG OLED TV Denon AV receiver for Netflix Amazon prime Video Connections

July 20, 2020

Some of the Netflix Dolby Vision Movies or shows support Dolby Atmos format. Please do the settings to make it work.

Update the firmware of LG TV and Denon AV receiver.
Denon AV receiver Supports Dolby Atmos

Video, select HDMI control ON
Connect HDMI OUT port of AV receiver to HDMI IN of LG OLED TV
Use good quality HDMI cable.
LG TV side

select Audio OUT as ARC/OPTICAL OUT
also, connect the optical cable from TV audio out to AV receiver IN port.
The optical solution provides better sound quality.
Once all the settings are made, turn off both Denon receiver and LG OLED TV.
Power on both TV and receiver.
Start Netflix APP and Dolby Atmos movie.
Your Denon receiver will show the sound format as DOLBY ATMOS.
You will feel different feelings when you watch Dolby Atmos formatted movies.

When you run movies supports Dolby Atmos in AMAZON Prime Video, the receiver will show the Dolby Atmos on the screen. The best show in Amazon Prime Video to test is 

Tom Clancy's Jack Ryan

Netgear Multi-gig Internet port Aggregation set up

 

Netgear Multi-gig Internet port Aggregation set up

Netgear Multi-gig Internet port Aggregation set up

Ethernet port aggregation between two devices Router and modem allows your devices to treat multiple Ethernet links as if they were a single link. Combining two network connections increases bandwidth and provides network redundancy if one link fails.

To set up Ethernet port aggregation on your NETGEAR Nighthawk CM1100 Multi-Gig Speed Cable Modem:

1.     Launch a web browser from a device that is connected to your cable modem.

2.     Enter 192.168.100.1

A login window opens.

3.     Enter the user name and password.

The BASIC Home page displays.

The user name is admin. The default password is password. The user name and password are case-sensitive.

4.     Select ADVANCED > Advanced Setup > Ethernet Port Aggregation.The Ethernet Port Aggregation page displays.

5.     Select Enable (LACP-IEEE 802.3ad).

6.     Click Apply.

7.     Set up Ethernet port aggregation on the other network device. Better to use Netgear router on other end and enable port aggregation of Uplink and port #1

8.     Using two Ethernet cables, connect LAN1 and LAN2 to the aggregated ports on the other network device.

After you connect the linked WAN ports on the device that supports Ethernet Port Aggregation to the two linked ports on the cable modem, the Ethernet Port Aggregation Status will show as Active if your router has enabled WAN Aggregation.

Log in to your router and enable Internet port aggregation: a. Launch a web browser from a computer or mobile device that is connected to the router network A login window opens.Enter the router admin user name and password.. The BASIC Home page displays.

d. Select Internet. The Internet Setup page displays. e. In the WAN Preference section, select the WAN aggregation (1 Gbps + 1 Gbps) radio button.

 f. Click the Apply button. Your settings are saved.

3. Connect the Internet port and Ethernet port 1on your router to two Ethernet ports on your modem.

Calendar Seetings

IPHONE 5S 5C

When you create an event in IPHONE 5S/C, the alert is turned off by default. You can change the behavior by following the given steps

Go to Settings

 

Select Mail,Contacts,Calendars

 

Go to Calendars

select Default Alert Times

Select  Events

select your choice as 30 minutes or 15 minutes or any time preference.

 

Next time, when you create an event, the alert will be automatically set.

Set Up Finger Print TOUCH ID on IPHONE 5S

Set Up FingerPrint TOUCH ID  using IPHONE 5S

Before you scan the finger, make sure your fingers are clean. In order to start the process, 

• go to Settings, 
• select General,
• select Pass code and fingerprint. 
• Enter your pass code
•  and 
• click on add fingerprint.

Place the finger (flat side) to the home button of the phone and follow the instructions on the screen. You need to look at the Graphics on the screen, once the scanning finishes, you need to pull the finger, You may need to place and pull the finger several times until you see Success message. Also you need to place the curved part of the finger during the scanning process. Once the scanning has completed, you can add additional finger prints as backup; For example finger print of your spouse or your kids.

IPHONE IOS Security Warming

IPhone-IOS 7 Security Warning 

"Trust this computer
your settings and date will be accessible from the computer when connected
trust or don't trust"

IOS version 7 has built in Security root Certificate is installed. This prevents any external hacking into IPHONE.

Whenever you connect your IPHONE to a PC or any intelligent device, Security message will POP UP. Please select the appropriate option. If the PC has ITUNES installed, it will SYNC with your IPHONE. Otherwise you will get security warnings.

IOS 7 UPGRADE TIPS - IPHONE 4/4S,IPHONE 5

IOS 7 Upgrade Tips

 Please assure you follow the tips before you upgrade IPHONE or IPAD to newly released version 7.

1. Update the current IOS with available updates.

2. Back up your IPHONE/IPAD to ICLOUD

3. Update the Itunes in your PC and back up your IPHONE and IPAD 

4. Be prepare for the Final IOS 7 upgrade, make sure you  reset the IPHONE or IPAD before the upgrade.

5. Plug the power cable to the IPHONE or IPAD and start the IOS 7 upgrade. I prefer to do during the night time, when you wake up, you have a new IOS version installed.

6. Upgrade takes few hours and wait with patience

7. Once the IOS is fully loaded, update all the APPS.

8. Once all the APPS are updated, reset the phone. Now your IPHONE or IPAD is ready for new IOS version 7.

   If you do not like the new IOS version, you can go back to the previous version using ITUNES backup.

   If you like the new IOS 7.0, back up the PHONE/IPAD using ICLOUD and ITUNE.